Duplicate Up To 4 Remote Controls In Seconds!
Never be locked out of your vehicle again! The Copyit™ Remote Control Duplicator is able to make a copy of any key in just a few simple steps!
Duplicate your existing remote control for cars, sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft devices, home automation, etc. in seconds.
Don't worry about your privacy and safety being compromised. This duplicator adopts one-to-one key copy technology and the password of each key is saved individually.
It features high transfer sensitivity and no signal blocking. The copy transmitter switch is durable, plus you can take it anywhere easily with its key chain design to copy any key on the go!>
- WIRELESS REMOTE-CONTROL DUPLICATOR: Duplicate existing remote controllers for cars, car sunroofs, garage doors, gate doors, heating systems, home automation e.g. lighting and etc.
- ABCD FOUR BUTTONS: Respectively copies four different types of chips and so operate four different types of facilities.
- FIXED FREQUENCY: Works for 315 / 433MHz fixed codes and learning codes; transmit distance is 50-100m (open space).
- ONE-TO-ONE KEY COPY TECHNOLOGY: The password of each key is saved individually and is reliable.
- PORTABLE HUMANIZED DESIGN: Handy key chain size attached to your car keys. Button slide cover to protect buttons from accidental unplanned operation.
For Clear code
- Press button A&B at the same time, in about 2 seconds the LED light will flash 3 times and then go out.
- Release button B at the same time, the button A continues to hold, don't release.
- Press button B for 3 times, then you can see the LED light will flash rapidly and continuously (button A is still holding) which indicates that the code has been cleaned up.
- Release the button A and now you have successfully cleared the code.
- Take the original remote control in one hand and Clone Remote Control on the other. Keep the two remote controls as close as possible.
- Press the first keys of the two remote controls altogether and you should see the LED light will flash 2 times and then slowly flash 3 times.
- You have now successfully cloned that button now uses the same method to copy the rest of the keys.
- Powered by 1 x 27A battery (included)
- Compatible chips: 2262, 2260, 5026, 5326, 5326 - 3, 5326 - 4, FP527, PT2240, EV1527, HT6010, HT6014, HT12E, HT640, HT680, PLC168, SMC series, 9XX, PT2292, 12L - 4SC, HT6026, UM3750AM, etc.
- Compatible Crystal Frequency: AMERICAN 315 MHZ / OTHER COUNTRIES 433 MHZ
- 1 x Copyit™ Remote Control Duplicator
SHIPPING DELAY NOTICE: Please expect 2-4 week shipping delay due to the High Volume of Order.